PRE-RELEASE
Duct, wiring harness, bumper, front
| Duct, wiring harness, bumper, front |
| To remove |
| 1. |
Raise the car.
|
|
| 2. |
Remove the
front bumper shell
.
|
|
| 3. |
Remove the duct.
|
|
| • |
Remove the bolts (A).
|
| • |
Lift up the duct (B).
|
| • |
Remove the washer hose (C).
|
| • |
Remove the clips (D) and the wiring harness (E).
|
| To fit |
| 1. |
Fit the duct.
|
|
| • |
Fit the wiring harness (E) in the rear duct.
|
| • |
Fit the clips (D).
|
| • |
Fit the washer hose (C) in the front duct.
|
| • |
Lift the duct (B) into position so that the locating lugs are positioned correctly.
|
| • |
Fit the bolts (A).
|
| 2. |
Fit the
front bumper shell
.
|
|
| 3. |
Lower the car.
|
|
