PRE-RELEASE
Moulding, door opening, 4D
| Moulding, door opening, 4D |
| To remove |
| 1. |
Loosen the strip using
82 93 474 Removal tool
. Start at the front edge and lift the rear edge of the strip from the clip.
|
|
| Refitting an old strip |
| 1. |
Let the clips remain in the body. Replace clips as necessary.
|
|
| 2. |
Turn the clips so they are positioned correctly.
|
|
| 3. |
Fit the strip by guiding in its guide clips. Press in the strip so that the clips fasten.
|
|
| Fitting a new strip |
| 1. |
Remove the clips in the body using a knife.
|
||||||||||
| 2. |
Fit the strip by guiding in its guide clips. Press in the strip so that the clips fasten.
|
|
