PRE-RELEASE
Rear light cluster
| Rear light cluster |
| Removing |
| 1. |
Open the boot lid.
|
|
| 2. |
Open the side hatches.
|
|
| 3. |
Remove the rear light's 3 nuts.
|
|
| 4. |
Part the connector and remove the rear light.
|
|
| Fitting |
| 1. |
Plug in the connector.
|
|
| 2. |
Fit the rear light with the help of the guide pins. Check the fit against the luggage compartment's moulding and rear light.
|
|
| 3. |
Fit the rear light's nuts.
Tightening torque up to and including M06 10 Nm (7 lbf ft) Tightening torque from and including M07 8 Nm (6 lbf ft) 
|
|
| 4. |
Close the side hatches close the boot lid.
|
|
