ME9 / P0338 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Malfunction Indicator Lamp
Engine dies while running/idling.
Message in SID regarding TCM and TCS/ESP.
Crankshaft Position Sensor, Too Many Pulses
Fault symptom
Malfunction Indicator Lamp
Engine dies while running/idling.
Message in SID regarding TCM and TCS/ESP.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
| Number of references gaps detected on crankshaft position sensor does not match number of detected camshaft revolutions. |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
| Electrical fault in connecting leads or component. |
Functions in the diagnostic tool related to the fault:
| (See also description of readings/activations in diagnostic tool) |
