PRE-RELEASE
Oil sump
| Oil sump |
| To remove |
| 1. |
Remove the
Power train
or
Power train, to remove, 4WD
.
|
|
| 2. |
Remove
Camshaft covers, removed engine
|
|
| 3. |
Remove
Timing cover
.
|
|
| 4. |
Remove the oil cooler assembly from the cylinder block. Remove the gasket.
|
|
| 5. |
Remove the oil sump. Prise carefully with a pry bar.
|
|
| 6. |
Clean the sealing surfaces from gasket residue and the like.
|
|
| To fit |
| 1. |
Apply a 2 mm thick bead of
93 160 951 Flange sealant
on the oil sump sealing surface and fit a new seal on the oil strainer induction pipe.
|
|
| 2. |
Fit the oil sump.
Tightening torque, M6 bolts: 10 Nm (7 lbf ft) Tightening torque, M8 bolts, 25 Nm (18 lbf ft). 
|
|
| 3. |
Position a new gasket and fit the oil cooler to the cylinder block.
Tightening torque 25 Nm (18 lbf ft) 
|
|
| 4. |
Fit
Timing cover
.
|
|
| 5. |
Fit
Camshaft covers, removed engine
.
|
|
| 6. |
Fit
Power train
or
Power train, to fit, 4WD
.
|
|
