PRE-RELEASE
Expansion tank
| Expansion tank |
|
|||||||||||||
Warning
| To remove |
| 1. |
Undo the cap on the expansion tank and release the pressure.
|
|
| 2. |
Raise the car.
|
|
| 3. |
Undo the right-hand side of the spoiler shield.
|
|
| 4. |
Place a receptacle under the car, connect a hose and drain the cooling system.
|
|
| 5. |
Lower the car.
|
|
| 6. |
Remove the upper engine cover.
|
|
| 7. |
Detach the bleeder hose and the turbocharger cooling return hose from the expansion tank.
|
|
| 8. |
Unplug the upper connector of the engine control module.
|
|
| 9. |
Unplug the atmospheric pressure sensor connector (539).
|
|
| 10. |
Detach and move aside the cable duct.
|
|
| 11. |
Detach and move aside the plate bracket from the intake manifold.
|
|
| 12. |
Detach the coolant hose with quick coupling from the expansion tank.
|
|
| 13. |
Move up the expansion tank and unplug the level sensor connector.
|
|
| 14. |
Remove the expansion tank.
|
|
| To fit |
| 1. |
Plug in the level sensor connector and fit the expansion tank.
|
|
| 2. |
Attach the coolant hose with quick coupling to the expansion tank.
|
|
| 3. |
Fit the plate bracket to the intake manifold.
|
|
| 4. |
Fit the cable duct.
|
|
| 5. |
Plug in the atmospheric pressure sensor connector (539).
|
|
| 6. |
Plug in the upper connector of the engine control module.
|
|
| 7. |
Attach the bleeder hose and turbocharger cooling return hose to the expansion tank.
|
|
| 8. |
Fit the upper engine cover.
|
|
| 9. |
Carry out
Cooling system, pressure testing
.
|
|
| 10. |
Top up the coolant. See
Bleeding and charging the cooling system, B284
.
|
|
| 11. |
Replace the upper engine cover.
|
|
| 12. |
Fit the right-hand side of the spoiler shield.
|
|
