PRE-RELEASE
Battery cover, bottom
| Battery cover, bottom |
| To remove |
| 1. |
Remove the
battery
.
|
|
| 2. |
Detach the battery's air inlet pipe and main fuse box:
|
|
| • |
Detach the battery's air inlet pipe (A).
|
| • |
Cars with petrol engine:
Press in the catch and move aside the fuse box in front of the battery.
|
| 3. |
Undo the catches (A) and move aside the heat shield, letting any components remain on the heat shield.
|
|
| 4. |
Remove the bottom of the battery cover:
|
|
| • |
Cars with theft protection:
Undo the cable tie of the bonnet switch (A) from the battery cover.
|
| • |
Undo any wiring harness clips (B) from the battery cover.
|
| • |
Remove the screws (C) and lift out the bottom of the battery cover.
|
| To fit |
| 1. |
Fit the bottom of the battery cover:
|
|
| • |
Position the bottom of the battery cover. Check that the positive cable lies in the cable duct.
|
| • |
Fit the screws (C) and apply
74 96 268 Thread locking adhesive
.
Tightening torque 24 Nm (18 lbf ft) |
| • |
Cars with theft protection:
Fit the bonnet switch (A) to the battery cover.
|
| • |
Secure any wiring harness to the battery cover with clips (B).
|
| 2. |
Fit the heat shield.
|
|
| 3. |
Attach the battery's air inlet pipe and main fuse box:
|
|
| • |
Cars with petrol engine:
Fit the fuse box (B).
|
| • |
Attach the battery's air inlet pipe (A).
|
| 4. |
Fit the
battery
.
|
|
