PRE-RELEASE
Starter motor, B207
| Starter motor, B207 |
| To remove |
| 1. |
Remove the battery cover.
|
|
| 2. |
Disconnect the negative battery cable.
|
|
| 3. |
Raise the car.
|
|
| 4. |
Disconnect the starter motor connecting cables.
|
|
| 5. |
Remove the starter motor retaining bolts.
|
|
| 6. |
Lower the starter motor and lift it out.
|
|
| To fit |
| 1. |
Lift the starter motor into place.
|
|
| 2. |
Fit the starter motor retaining bolts.
Tightening torque 47 Nm (35 lbf ft) 
|
|
| 3. |
Clean, apply Vaseline and connect the starter motor connecting cables.
|
|
| 4. |
Lower the car to the floor.
|
|
| 5. |
Connect the negative cable of the battery.
|
|
| 6. |
Fit the battery cover.
|
|
| 7. |
Reset the car; see
Procedure after battery disconnection
.
|
|
