PRE-RELEASE
Driver in differential clutch, replacing
| Driver in differential clutch, replacing |
| To remove |
| 1. |
Remove the
Propeller shaft
.
|
|
| 2. |
Remove the driver (A) with a puller.
|
|
| 3. |
Remove the seal (A) with a screwdriver.
|
|
| To fit |
| 1. |
Fit the seal (A) using
DT-49065 Fitting drift
.
|
|
| 2. |
Fit the driver (A) using
DT-49048 Support
.
Tightening torque: 100 ± 5 Nm (73.8± 3.7 lbf ft)
|
|
| 3. |
Check the oil level as specified in
Checking/changing fluid in the differential clutch
.
|
|
| 4. |
Fit the
Propeller shaft
.
|
|
