SAAB WIS ONLINE

PRE-RELEASE

Torque converter

Torque converter

To remove


1. Remove the gearbox, see Automatic transmission assembly Z19DTH, Z19DTR and Automatic transmission assembly B284 .

2. B284, Z19DTR: Fit 87 92 681 Handle, torque converter .

Z19DTH: Fit KM-574 Handle, torque converter .

3. Lift out the torque converter (A). Collect any spilled oil.



To fit


1. Align the torque converter (A).


2. Check that the torque converter has reached the correct position by placing a steel ruler on the torque converter shell's mating surface and measure the distance between the mating surface and the driver plate contact surface on the torque converter.

B284: The distance should be: min. 9 mm.

Z19DTH, Z19DTR: The distance should be: min. 15 mm.

3. Fit the gearbox, see Automatic transmission assembly Z19DTH, Z19DTR and Automatic transmission assembly B284 .


PRE-RELEASE