PRE-RELEASE
Pedal bracket, LHD
| Pedal bracket, LHD |
| To remove |
| 1. |
Remove
Steering wheel member
.
|
|
| 2. |
Remove brake pedal link bolt.
|
|
| 3. |
Undo the brake servo bolts.
|
|
| 4. |
Manual gearbox
: Remove the clutch master cylinder. Detach the pushrod from the clutch pedal. Use a pair of nose pliers with bent jaws.
|
|
| 5. |
Remove the pedal bracket.
|
|
| To fit |
| Note | ||
|
When changing the pedal bracket, the following parts must be removed from the spare part: |
||
| • |
Brake pedal pushrod.
|
|
| • |
Plate with accelerator pedal that the pedal bracket is fastened to.
|
|
| • |
Manual gearbox
: Clutch cylinder
|
|
| 1. |
Fit the pedal bracket to the bulkhead.
Tightening torque 20 Nm (14 lbf ft) 
|
|
| 2. |
Manual gearbox
: Connect the pushrod to the clutch pedal. Fit the nuts to the clutch master cylinder. Pull out the adjusting rod from the self-adjusting cruise control switch and press it back with the clutch pedal for correct adjustment.
Tightening torque 20 Nm (14 lbf ft) 
|
|
| 3. |
Fit the brake servo bolts.
Tightening torque 20 Nm (14 lbf ft) 
|
|
| 4. |
Fit the brake pedal link bolt.
|
|
| 5. |
Adjust the pedal switches. Depress the brake pedal and pull out the adjusting rod from the self-adjusting pedal switches.
|
|
| 6. |
Fit the
steering wheel member
.
|
|
