Microswitch, bootlid/tailgate
|
|
Microswitch, bootlid/tailgate
|
|
2.
|
Unplug the microswitch connector.
|
|
3.
|
Remove the 4 nuts securing the moulding to the bootlid.
|
|
4.
|
Press in the clips securing the moulding. Pull out the moulding.
|
|
5.
|
Remove the catch securing the microswitch using a screwdriver in the edge of the catch.
|
|
6.
|
Unplug the flat pin connector to the microswitch.
|
|
7.
|
Remove the microswitch.
|
|
1.
|
Fit the microswitch.
|
|
2.
|
Plug in the flat pin connector. Use a screwdriver to lift up the seal.
|
|
3.
|
Fit the catch securing the microswitch. Make sure it engages properly.
|
|
4.
|
Fit the moulding to the bootlid.
|
|
5.
|
Fit the nuts securing the moulding to the bootlid.
|
|
6.
|
Plug in the microswitch connector.
|
