PRE-RELEASE
Solenoid, fuel filler flap, CV (434a)
| Solenoid, fuel filler flap, CV (434a) |
| To remove |
| 1. |
Open the boot lid.
|
|
| 2. |
Remove
Luggage compartment side trim, CV
on the right hand side.
|
|
| 3. |
Loosen the solenoid retaining bolts and lift up the solenoid. Pull the rubber gaiter from the filler flap sleeve.
|
|
| 4. |
Part the connector.
|
|
| To fit |
Fit a new gaiter as follows:
| 1. |
Insert the gaiter through the filler flap sleeve hole using a pair of pliers.
|
|
| 2. |
Grip the solenoid's front gaiter and pull it out through the hole.
|
|
| 3. |
Place the solenoid in the mounting and tighten it. Connect the connector.
|
|
| 4. |
Cut off the end of the gaiter according to the markings.
|
|
| 5. |
Check the filler flap's locking function.
|
|
| 6. |
Fit
Luggage compartment side trim, CV
. Close the boot lid.
|
|
