PRE-RELEASE
Cup holder, rear seat
| Cup holder, rear seat |
| Removing |
| 1. |
Remove the rear seat by grasping the front edge, above the mounting points, and pulling upward.
|
|
| 2. |
Press in the clips on the underside of the cup holder and pull out the cup holder unit.
|
|
| 3. |
Remove the cup holder insert from the rear seat by pressing in the clips on the rear edge of the insert to release it from the bar.
|
|
| 4. |
Carefully remove the insert through the hole in the front edge of the rear seat. Be careful not to damage the seat upholstery.
|
|
| Fitting |
| 1. |
Carefully insert the cup holder insert into the hole in the front edge of the rear seat. Be careful not to damage the seat upholstery.
|
|
| 2. |
Press in the insert so that the clips engage the bar.
|
|
| 3. |
Press the cup holder into position in the insert. Take care to ensure that the cup holder clip locks correctly.
|
|
| 4. |
Fit the rear seat by lowering the front edge and pressing the seat down above the mounting points. Check that the rear seat is properly fitted.
|
|
