PRE-RELEASE
Ignition coil with integrated power stage (320), B207
| Ignition coil with integrated power stage (320), B207 |
| To remove |
| 1. |
Remove cover over ignition coils.
|
|
| 2. |
Remove the ignition coil.
|
|
| 3. |
Unplug the ignition coil connector.
|
|
| To fit |
| 1. |
Attach the connector.
|
|
| 2. |
Fit the ignition coil.
Tightening torque 20 Nm (15 lbf ft) |
|
| 3. |
Make sure to locate the ignition coil cables so they are not pinched.
|
|
| 4. |
Fit the cover over the ignition coils.
Tightening torque 8 Nm (6 lbf ft) 
|
|
