Check the engine oil pressure.
|
|
Check the engine oil pressure.
|
Warning
|
|
The turbocharger can be hot and great care must be observed.
|
|
|
|
|
|
|
1.
|
Remove the banjo nipple in the turbocharger oil delivery pipe, collect any oil spill.
|
|
3.
|
Start the engine and read off the pressure. See "Oil pressure" under
Lubricating system
. Turn off the engine.
|
|
4.
|
Make sure the pressure gauge is showing 0 bar before detaching it from the adapter. Remove the pressure gauge and the adapter. Wipe away any spilled oil.
|
|
5.
|
Fit the banjo nipple with new sealing washers. Grip the pipe so it does not turn.
|
Note
|
|
Engines with aluminium washers: first fit washers part no. 551 700 00 on the banjo nipple where the tabbed gasket section is turned towards the turbo. Fit the banjo screw by screwing it through the gasket and then into the turbo.
|
Tightening torque 22 Nm (16 lbf ft)
|
