PRE-RELEASE
Front direction indicators
| Front direction indicators |
| To remove |
| 1. |
Open the bonnet.
|
|
| 2. |
Remove the bulb:
|
|
| • |
LH:
Remove the washer fluid filler pipe (A).
|
| • |
RH:
Remove the protective cover of the xenon/halogen lamp.
|
| • |
Turn the bulb socket (B) anticlockwise and lift out the socket.
|
| • |
Not US/CA:
Remove the bulb from the socket by turning it anticlockwise.
|
| • |
US/CA:
Remove the bulb (C) from the socket by carefully prying aside the lock lugs on the short sides of the fitting.
|
| To fit |
| Important | ||
|
When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged. |
||
| 1. |
Fit the bulb:
|
|
| • |
US/CA:
Fit the bulb into the socket by pressing it into the fitting. Make sure that the lock lugs engage.
|
| • |
Not US/CA:
Fit the bulb in the socket by turning it clockwise.
|
| • |
Fit the bulb socket to the headlamp by turning it clockwise.
|
| • |
LH:
Fit the washer fluid filler pipe.
|
| • |
RH:
Fit the protective cover of the xenon/halogen lamp.
|
| 2. |
Close the bonnet.
|
|
