Transfer case, changing the oil
|
|
Transfer case, changing the oil
|
|
2.
|
Remove the front part of the rear catalytic converter (A). Suspend it and relieve the load with
83 95 212 Strap
.
|
|
3.
|
Remove the level plug (A).
|
|
4.
|
Remove the drain plug (B), and drain the oil.
|
|
5.
|
Fit the drain plug (B) with new seal.
Tightening torque 50 Nm (37 lbf ft)
|
|
6.
|
Fill with oil through the level plug (A) until it starts to run out. Use a clean hose and funnel. The oil level should be at the lower edge of the hole.
|
|
7.
|
Fit the level plug (A) with new seal.
Tightening torque 50 Nm (37 lbf ft)
|
|
8.
|
Fit the front part of the rear catalytic converter (A). Remove the strap.
Tightening torque 30 Nm (22 lbf ft)
|
|
9.
|
Lower the car to the floor.
|
