PRE-RELEASE
Torque converter B207/Z19DTR
| Torque converter B207/Z19DTR |
| To remove |
| 1. |
Remove the gearbox, see
Automatic transmission assembly Z19DTR
.
|
|
| 2. |
Z19DTR:
Fit
87 92 681 Handle, torque converter
.
|
|
| 3. |
Lift out the torque converter (A). Collect any spilled oil.
|
|
| To fit |
| 1. |
Align the torque converter (A).
|
|
| 2. |
Check that the torque converter has reached the correct position by placing a steel ruler on the torque converter shell's mating surface and measure the distance between the mating surface and the driver plate contact surface on the torque converter.
Z19DTR: The distance should be: min. 15 mm. |
|
| 3. |
Fit the gearbox, see
Automatic transmission assembly Z19DTR
.
|
|
