Inboard drive shaft universal joint, automatic
|
|
Inboard drive shaft universal joint, automatic
|
|
Important
|
|
The drive assembly is very susceptible to dirt.
|
|
|
|
1.
|
Clean the drive shaft thoroughly.
|
|
2.
|
Set up the drive shaft in a vice with soft jaws.
|
|
3.
|
Undo the clamping ring on the boot.
|
|
4.
|
Remove the inboard universal joint and clean away the grease.
|
|
5.
|
Set up the shaft in a hydraulic press. Use
87 91 212 Puller ring
for support and plastic tiles to protect the bearings. Use a 17 mm socket as a drift.
|
|
6.
|
Remove the boot from the drive shaft.
|
|
1.
|
Fit the boot onto the drive shaft.
|
|
2.
|
Press in the tripode to the edge of the groove in a hydraulic press with a 30 mm socket.
|
