PRE-RELEASE
Intermediate shaft bearing, 4-cyl petrol
| Intermediate shaft bearing, 4-cyl petrol |
| To remove |
| 1. |
Remove the bearing carrier.
|
|
| 2. |
Remove the small circlip.
|
|
| 3. |
Press the shaft out of the bearing in a hydraulic press using
87 92 210 Support, differential bearing
and
87 90 859 Press sleeve
.
|
|
| 4. |
Press out the bearing with
87 91 311 Sleeve, driver shaft bearing
.
|
|
| To fit |
| 1. |
Press in the new bearing with
87 91 311 Sleeve, driver shaft bearing
and 87 90 461 Sleeve, bearing ring for support.
|
|
| 2. |
Press on the intermediate shaft with
87 90 487 Sleeve, differential bearing
.
|
|
| 3. |
Fit the circlip.
|
|
| 4. |
Fit the bearing carrier.
Tightening torque 10 Nm (7 lbf ft) |
|
