PRE-RELEASE
Brake pedal switches
| Brake pedal switches |
| To remove |
| 1. |
Remove the sound baffle on the driver's side
.
|
|
| 2. |
Remove the handle and cover for steering wheel adjustment.
|
|
| 3. |
Press down the brake pedal as far as possible. There must be a vacuum in the brake servo (it may be necessary to start the engine).
|
|
| 4. |
Remove the switch pushrod and locking sleeve. Push in the lock tongue and remove the switch.
|
|
| 5. |
Remove the connector.
|
|
| To fit |
| 1. |
Remove the switch pushrod and locking sleeve.
|
|
| 2. |
Plug in the connector.
|
|
| 3. |
Press down the brake pedal as far as possible. There must be a vacuum in the brake servo (it may be necessary to start the engine).
Fit the switch. Press in the locking sleeve.
|
|||||||
| 4. |
Fit the handle and cover for steering wheel adjustment.
|
|
| 5. |
Depress the brake pedal as much as possible and pull out the switch pushrod. Release the pedal.
|
|
| 6. |
Fit the sound baffle on the driver's side
.
|
|
