PRE-RELEASE
Vacuum pipe, brake servo RHD (B207)
| Vacuum pipe, brake servo RHD (B207) |
| To remove |
|
|||||||
Warning
| 1. |
Pump the brake pedal until the vacuum is removed from the brake servo.
|
|
| 2. |
Remove the pipe from the T-nipple on the vacuum pipe.
|
|
| 3. |
Aut
: Remove the gear cable clips from the pipe.
|
|
| 4. |
Remove the pipe from the brake servo.
|
|
| 5. |
Remove the upper nuts on the heat shield on the bulkhead wall and move the heat shield aside.
|
|
| 6. |
Remove the vacuum pipe.
|
|
| To fit |
| 1. |
Put in place the pipe and fit it to the brake servo.
|
|
| 2. |
Fit the pipe to the T-nipple on the vacuum pump.
|
|
| 3. |
Aut
: Fit the gear cable clips.
|
|
| 4. |
Fit the vacuum pipe to the clips on the bulkhead wall.
|
|
| 5. |
Fit the heat shield
|
|
| 6. |
Connect an exhaust extractor.
|
|
| 7. |
Start the engine and check the operation of the brake servo.
|
|
