PRE-RELEASE
B-pillar decor, rear door
| B-pillar decor, rear door |
| To remove |
| 1. |
Open the window fully.
|
|
| 2. |
Remove
Rear door trim
.
|
|
| 3. |
Remove
the window frame cover
.
|
|
| 4. |
Remove the outer weatherstrip using
82 93 474 Removal tool
.
|
|
| 5. |
Loosen the U-moulding and pull it out of the rail.
|
|
| 6. |
Remove the decor screws.
|
|
| 7. |
Remove the forward side moulding.
|
|
| 8. |
Lift away the decor.
|
|
| To fit |
| 1. |
Position the decor and fit the screws.
|
|
| 2. |
Fit the front side moulding. Make sure that the lower part fits snugly against the door side moulding.
|
|
| 3. |
Fit the U-moulding in the decor by prodding it down a short way. Press in the moulding against the decor. check the function of the window and the fit of the moulding.
|
|
| 4. |
Fit the outer weatherstrip. Raise and lower the window a few times to check its operation.
|
|
| 5. |
Fit the
door trim
.
|
|
| 6. |
Fit the window frame cover
.
Cars with pinch protection : Perform Calibration of pinch protection . |
|
