PRE-RELEASE
Wing moulding, front, 9-3X
| Wing moulding, front, 9-3X |
| To remove |
| 1. |
Remove
Wing liner, front.
|
|
| 2. |
Press in the locking tab (A) on the clips, pull out the front section of the wing moulding (B) and the unhook the catch (C) from the bumper shell.
|
|
| 3. |
Press
BO-50110 Removal tool
(A) over the wing moulding's clips (B) and remove the moulding. Start at the front edge.
|
|
| To fit |
| 1. |
Fit the moulding. Start at the rear edge.
|
|
| 2. |
Fit the wing moulding (B) to the bumper shell, clips (A) and catch (C).
|
|
| 3. |
Fit
Wing liner, front.
|
|
