PRE-RELEASE
Boot lid, CV
| Boot lid, CV |
| To remove |
| 1. |
Remove the bootlid trim.
|
|
| 2. |
Unplug the connectors.
|
|
| 3. |
Remove the wiring clips.
|
|
| 4. |
Remove wiring grommets. Pull out the wiring from the bootlid.
|
|
| 5. |
Remove the bootlid bolts. Remove the bootlid together with an assistant.
|
|
| To fit |
| 1. |
Together with an assistant, lift the bootlid into fitting position. Fit the bootlid bolts.
|
|
| 2. |
Insert the wiring through the grommet openings in the bootlid. Fit the wiring grommets.
|
|
| 3. |
Place the wiring in fitting position in the bootlid. Fit the wiring clips.
|
|
| 4. |
Plug in the wiring connectors in the bootlid.
|
|
| 5. |
Fit the boot lid trim.
|
|
| 6. |
Check bootlid alignment. Adjust if necessary, see
Bootlid adjustment, CV
.
|
|
