PRE-RELEASE
Boot lid adjustment, CV
| Boot lid adjustment, CV |
| Adjustment, up, down |
| 1. |
If the rear of the boot lid is too high or too low, adjust the boot lid lock plate, see below, "Adjustment, boot lid lock“.
|
|
| 2. |
If the front of the boot lid is too high or too low, adjust in the following manner:
|
|
| 3. |
Close the boot lid.
|
|
| 4. |
Measure how much the boot lid deviates from the correct position.
|
|
| 5. |
Open the boot lid.
|
|
| 6. |
Read the graduation on the boot lid hinge.
|
|||||||
| 7. |
Loosen the front bolt on the boot lid hinge.
|
|
| 8. |
Move the hinge towards the front to the desired height and tighten the bolts.
|
|
| 9. |
Repeat until the front of the boot lid is optimally adjusted.
|
|
| Adjustment, lateral, backwards, forwards |
| 1. |
Open the boot lid.
|
|
| 2. |
Loosen the boot lid lock plate bolts until the boot lid can be moved.
|
|
| 3. |
Loosen the bolts securing the boot lid on both sides until the boot lid can be moved in the hinge.
|
|
| 4. |
Close the boot lid slowly and carefully.
|
|
| 5. |
Align the boot lid by moving it until the size of the gap is the same all the way around.
|
|
| 6. |
Open the boot lid.
|
|
| 7. |
Fit the boot lid bolts.
|
|
| 8. |
Adjust the boot lid lock plate, see the following: "Adjustment, boot lid lock“.
|
|
| Adjustment, boot lid lock |
| 1. |
Open the boot lid.
|
|
| 2. |
Loosen the boot lid lock plate bolts until the boot lid can be moved somewhat.
|
|
| 3. |
Move the lock plate to the centre position and the highest position. Do not tighten the bolts completely.
|
|
| 4. |
Close the boot lid slowly and carefully. The boot lid should close easily without tension.
|
|
| 5. |
Check that the size of the gap between the boot lid and side panel is correct.
|
|
| 6. |
Open the boot lid.
|
|
| 7. |
Loosen the boot lid lock plate bolts. Move the lock plate in the desired direction and tighten the bolts.
|
|
| 8. |
Repeat until the rear of the boot lid is optimally adjusted and the boot lid can be opened and closed with ease.
|
|
