PRE-RELEASE
Lock for soft top storage drive
| Lock for soft top storage drive |
| To remove |
| 1. |
Open the sixth bow and secure with the soft top support.
|
|
| 2. |
Remove the cable locks on the soft top cover hinge. Unhook the cable.
|
|
| 3. |
Loosen the upper clips on the torsion box for the cable. Note the location of the cable.
|
|
| 4. |
Remove the soft top support. Close the soft top cover and sixth bow.
|
|
| 5. |
Open the bootlid.
|
||||||||||
| 6. |
Remove
Luggage compartment side trim, CV
.
|
|
| 7. |
Undo the control module nuts. Lay the control module to one side.
|
|
| 8. |
Loosen the cable clip.
|
|
| 9. |
Close the boot lid. Open the sixth bow and the soft top cover. Secure with the soft top support.
|
|
| 10. |
Remove the lock clip for the soft top storage lock. Remove the lock complete with cable.
|
|
| To fit |
| 1. |
Place the soft top storage lock (complete with cable) in mounting position.
|
|
| 2. |
Fit the lock clip.
|
|
| 3. |
Lower the cable into the luggage compartment. The cable must be behind the trim.
|
|
| 4. |
Fit the upper cable clip on the torsion box. Note the position of the cable.
|
|
| 5. |
Remove the soft top support. Close the soft top cover and sixth bow.
|
|
| 6. |
Open the bootlid.
|
||||||||||
| 7. |
Put the cable in mounting position. The cable must be lying behind the hose package. Make sure the cable is drawn correctly.
|
|
| 8. |
Fit the cable clip.
|
|
| 9. |
Fit the control module.
|
|
| 10. |
Close the boot lid. Open the soft top cover and the sixth bow. Secure with the soft top support.
|
|
| 11. |
Fit the cable to the soft top cover hinge with a pair of pliers. The cable must be lying behind the emergency operation tool. Fit the lock clips.
|
|
| 12. |
Fit
Luggage compartment side trim, CV
|
|
| 13. |
Remove the soft top support. Close the soft top cover and sixth bow.
|
|
| 14. |
Connect the diagnostics tool and erase any diagnostic trouble code.
|
|
| 15. |
Test the operation of the soft top.
|
|
