STC / B1000 35
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Soft top cannot be operated
Control Module. Internal Fault
Fault symptom
Message appears in display.
Soft top cannot be operated
On-board diagnosis
Type of diagnosis:
Enable criteria:
| Diagnostics run when ignition is ON. |
Fault criteria:
| Control module on-board diagnostics has detected a ROM error. |
Diagnostic help
See document "Before removing a control module"
Diagnostic help
Diagnosis regards:
| To locate electrical faults in the control module internal electronics. |
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
