PRE-RELEASE
Drive belt, auxiliaries
| Drive belt, auxiliaries |
| To remove |
| 1. |
Raise the car.
|
|
| 2. |
Free the front part of the right-hand wing liner.
|
|
| 3. |
Relieve the strain on the belt tensioner by turning it clockwise with a flexible spanner. Lock the tensioner with a 4 mm drill.
|
|
| 4. |
Remove the belt. If the old belt is being reused, mark out the direction of rotation.
|
|
| To fit |
| 1. |
Fit the belt. If the old belt is being reused, it must be mounted in the same direction of rotation as before.
|
|
| 2. |
Relieve the belt tensioner.
|
|
| 3. |
Check the belt position on all pulleys.
|
|
| 4. |
Fit the front part of the right wing liner.
|
|
| 5. |
Lower the car, start the engine and check the belt function.
|
|
