Topping up and bleeding the cooling system
|
|
Topping up and bleeding the cooling system
|
Warning
|
|
The cooling system is under pressure. Hot coolant and steam can escape.
|
|
- Open the cap slowly to release the pressure.
|
|
- Carelessness can cause eye and burn injuries
|
|
|
|
|
|
The cooling system should be test pressurised before filling. See
Cooling system, pressure testing
.
|
1.
|
Fill the cooling system with
40 - 93 170 402 Coolant
to approx. 30 mm above the mark on the expansion tank (coolant is blended - equal parts coolant and water).
|
|
2.
|
Open the air vent cock on the coolant pipe and release the air.
|
|
3.
|
Close the air vent cock and fit the coolant reservoir cap.
|
