PRE-RELEASE
Bulb, front DRL (US/CA)
| Bulb, front DRL (US/CA) |
DRL - Daytime Running Light
| To remove |
| 1. |
Open the bonnet.
|
|
| 2. |
Left-hand side:
Remove the battery cover, air inlet pipe (A) and main fuse box (B).
|
|
| 3. |
Remove the bulb:
|
|
| • |
Remove the cover (A) and turn the bulb socket anticlockwise (B). Lift out the bulb socket.
|
| • |
Remove the bulb from the socket by carefully pulling it straight out.
|
| To fit |
| Important | ||
|
When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged. |
||
| 1. |
Fit the bulb:
|
|
| • |
Fit the new bulb in the bulb socket. Make sure that lock lugs engage.
|
| • |
Fit the bulb socket in the headlamp by positioning it at its recess (note the guide groove). Turn the bulb socket clockwise (B) and fit the cover (A).
|
| 2. |
Left-hand side:
Fit the battery cover, air inlet pipe (A) and main fuse box (B).
|
|
| 3. |
Close the bonnet.
|
|
