PRE-RELEASE
MCC unit (504)
| MCC unit (504) |
Carry out measures before dismantling the control module .
| To remove |
| 1. |
Remove the MCC unit by carefully pulling it out. Use
82 93 474 Removal tool
to remove the unit.
|
||||||||||
| 2. |
Remove the MCC unit's connector.
|
|
| 3. |
Lift out the MCC unit.
|
|
| To fit |
| Important | ||
|
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection . |
||
| 1. |
Connect the MCC unit's connector.
|
|
| 2. |
Lift the MCC unit into position and fit it.
|
|
Carry out measures after fitting the control module
