PRE-RELEASE
Handbrake lever
| Handbrake lever |
| To remove |
| 1. |
Remove the floor console
.
|
|
| 2. |
Remove the rear air duct.
|
|
| 3. |
Loosen the adjustment and unhook the cables.
|
|
| 4. |
Remove the cable ferrules from the console.
|
|
| 5. |
Mark the position of the front nut.
|
|
| 6. |
Remove the bolts and nuts holding the lever mechanism. Lift out the mechanism.
|
|
| To fit |
| 1. |
Fit the lever and holder to the console. Make sure the front nut is aligned with the marking.
Tightening torque: 13 Nm (10 lbf ft) 
|
|
| 2. |
Connect and adjust the handbrake cables.
|
|
| 3. |
Fit the air ducts.
|
|
| 4. |
Fit the floor console
.
|
|||||||
| 5. |
Adjust the lever height in relation to the centre console by fitting the correct stop washer.
|
|
