SAAB WIS ONLINE

PRE-RELEASE

Wheel

Wheel

To fit


1. Clean the contact surface between the rim and the brake disc from dirt and rust.

2. Apply 30 06 442 White high-pressure grease paste to the hub.

Important

Make sure there is no grease on the contact surface between the rim and the brake disc.



3. Aluminium wheel: Oil in the bolt threads.

4. Hang the wheel in place.

Fit the bolts and tighten them alternately by hand to centre the wheel.


5. Tighten the bolts alternately twice.

Important

The wheel must be suspended freely when tightening the wheel bolts.


Tightening torque, aluminium rim, 110 Nm (81 lbf ft)

Tightening torque, steel rim, 50 Nm +90° +90°, max. 110 Nm (37 lbf ft +90° +90°, max. 81 lbf ft)

Note

To avoid tightening the bolts too hard when fitting steel rims, angle tighten with a torque wrench set to 110 Nm (81 lbf ft). If the torque wrench indicates that 110 Nm (81 lbf ft) has been reached, cease angle tightening.



PRE-RELEASE