PRE-RELEASE
Emblem, CV
| Emblem, CV |
The emblems are available as a spare part in a pack comprising one frame with transparent window and backing tape. The description below shows how to mount the emblems. Use the frame as a template when measuring the dimensions on the boot lid.
| To remove |
Protect the paintwork with adhesive tape around the emblem. Use a putty knife to carefully prise under the emblem.
| To fit |
First wash the area where the emblem is to be mounted with benzene.
| Note | ||
|
The emblems and the car must be at room temperature (approximately 20 ° C, 68 ° F) before the emblems can be mounted. |
| 1. |
Remove the backing tape on the emblem, leaving the emblem in the frame.
|
|
| 2. |
Position the frame on the boot lid as illustrated and fit the emblem.
|
|
| 3. |
Remove the frame.
|
|
