PRE-RELEASE
Front moulding, door opening, 5D
| Front moulding, door opening, 5D |
| To remove |
| 1. |
Loosen the strip using
82 93 474 Removal tool
. Start at the front edge and lift the rear edge of the strip from the clip.
|
|
| Refitting the old strip |
| 1. |
Leave the clip in place on the body. Change the clip if necessary.
|
|
| 2. |
Turn the clip to the correct position.
|
|
| 3. |
Fit the moulding by guiding in its inner seal and guide clips. Press in the moulding so that the clips engage.
|
|
| Fitting a new strip |
| 1. |
Remove the clips in the body by cutting them with a knife.
|
||||||||||
| 2. |
Fit the moulding by guiding in its inner seal and guide clips. Press in the moulding so that the clips engage.
|
|
