PRE-RELEASE

Door mirror, switch

To remove

1.	Remove the switch using 82 93 474 Removal tool . Note The switch may be glued in place (low VIN) which can make removal more difficult.

2.	Unplug the connector.

To fit

1.	Remove any remains of adhesive. Plug in the switch.

2.	Fit the switch by angling in the side facing the driver first. Check that the clip has engaged.

3.	Check that the switch works.

PRE-RELEASE

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.

Our Friends