CIM / B3925 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
The engine may not start.
BCM or CIM Not Added
Fault symptom
Message appears in display.
The engine may not start.
On-board diagnosis
Type of diagnosis:
| Diagnostics carried out according to valid fix code from the transponder. |
Enable criteria:
| Diagnostics runs when key is inserted. |
Fault criteria:
| Incorrect immobilizer code received from BCM. |
Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
Diagnostic help
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
