PRE-RELEASE
EDC16 / P0130 03
Read the instructions below then start the fault diagnostic procedure.
| P0130 03 |
O2S Circuit. Low Voltage. Sensor 1.
On-board diagnosis
Fault criteria:
| Voltage on control module input is less than 200 mV. |
Read the instructions below then start the fault diagnostic procedure.
| P0130 03 |
| Voltage on control module input is less than 200 mV. |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
