PDM / B1000 36
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Incorrect end position (electric window lift).
Control Module. Internal Fault
Fault symptom
Incorrect end position (electric window lift).
On-board diagnosis
Type of diagnosis:
| Diagnostics run each time control module "wakes". |
Enable criteria:
| When new data written to memory. |
Fault criteria:
| Control module on-board diagnostics has detected a EEPROM error. |
System reaction to a fault:
| Basic value from ROM used. |
Diagnostic help
Change the control module.
See "Procedure for control module replacement"
Diagnostic help
Diagnosis regards:
| To locate electrical faults in the control module internal electronics. |
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
