TCM ME9 / P1731 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Gear 1, Faulty Gear Ratio in Overrun.
Fault symptom
Message appears in display.
On-board diagnosis
Type of diagnosis:
Enable criteria:
| Engine running and not in limp home mode. |
| Driver not driving in 1st gear. |
| • | Normal exceptions for shifting error DTC: |
| Selector lever not in position D. |
| Battery voltage < 10.5 Volt. |
| • | Malfunction in one of the following systems: |
| Gear selector position sensor |
| Gearbox Fluid Temperature Sensor |
| Accelerator pedal position. |
Fault criteria:
| Gear ratio measured by the control module varies more than 20 % from the expected value. |
System reaction to a fault:
Diagnostic help
Diagnosis regards:
| Locating a mechanical fault. |
