UEC / B1000 36
Read the instructions below then
start the fault diagnostic procedure.
Control Module. Internal Fault
On-board diagnosis
Type of diagnosis:
| Diagnostics runs each time the control module is active and when programming has been carried out. |
Enable criteria:
Fault criteria:
| Control module on-board diagnostics has detected a EEPROM error. |
Diagnostic help
See "Before changing a control module" and "After fitting a control module" under Fault diagnosis, general.
Diagnostic help
Diagnosis regards:
| To locate electrical faults in the control module internal electronics. |
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
