PRE-RELEASE
Celette alignment system
| Celette alignment system |
Griffon is a track jig with removable composite ramps in sections as well as four chassis mountings.
The draw aligner can be used around the entire jig and can be beneficial when fixing minor damage due to its simple anchorage.
The base supports are made of a cast material that cracks when overloaded. This prevents recurring measurement errors on the jigs stemming from deformation. The jigs are specific to each model while the base supports can be used for all models.
The data documentation is well worked up and contains necessary measurements for alignment work.
The jig can be equipped with mechanical measurement system M2000 or electronic measurement system NAJA.
Celette is represented in most of Saab's markets.
One day of training with continual follow-up is included, provided by the representative of each market.
Dimensions
| Length | 6000 mm |
| Width | 2500 mm |
| Height above floor | 520 mm |
| Celete references |
The part numbers in the following tables are the supplier's own part numbers.
| 1 | Griffon alignment jig | GRO4F.3802 | |
| 1 | Draw aligner | SVN05.301 | |
| 1 | Module beams (x5) | 955.9002 | |
| 1 | MZ base support (x22) | MZ450.000 | |
| 1 | Cart for base supports | MZ450.905 | |
| 1 | McPherson control measurement | MZ2452 | |
| 1 | Pressure accessory, door opening | ATS.1802 | |
| 1 | Pulling kit | CAT500 | |
| 1 | Extra plates (part of MZ basic kit) | TV.400 | |
| 1 | Jig kit, Saab 9-3 | 2003-300 |
| Extra accessory |
| 1 | Extra puller | CSK.15111 | |
| 1 | Multi-support (holder for extra puller) | 9121.523 | |
| 1 | Cart with loading winch (non-rolling car) | GR97.0073 |
.
