PRE-RELEASE
Dataliner alignment system
| Dataliner alignment system |
A system with many different function. The design with longitudinal grooves generates an unlimited number of attachment points.
The work height is adjustable. There is also an easily movable work platform to make it simple to reach the top part of the vehicle.
Dataliner 3000 is a so-called drive-on jig. It supplements other Dataliner systems, which have been on the world market since 1973. Most components of all systems are interchangeable. An older Dataliner jig can therefore always be easily updated with the new components required for modern cars.
The laser measurement system can be easily moved between the various jigs at the workshop. This reduces the total investment cost.
Dataliner is represented in most of Saab's markets.
One day of training with continual follow-up is included, provided by the representative of each market.
In its standard version, the alignment jig is delivered with a laser measurement system and complete universal alignment system.
The short diagnosis time of about one hour makes the equipment suitable for use in damage assessment or the like.
Dimensions
| Length | 5000 mm |
| Width | 1850 mm |
| Height above floor | 490-710 mm |
| Weight | 585 kg |
| Dataliner 3000 basic kit |
The part numbers are Dataliner's own part numbers.
| 1 | Jig lift | 370 H-019 | |
| 4 | Chassis mounting | 570 H-297 | |
| 1 | Dataliner 3000 jig | 370 H-001 E | |
| 1 | Draw bar with chain mounting | 370 H-127 | |
| 1 | Free-wheel lift assembly | 570 H-017 E | |
| 4 | Joint unit 240 mm | 470 H-030 | |
| 1 | Joint unit 120 mm | 470 H-038 | |
| 1 | Adjustable support | 470 H-088 | |
| 2 | Track plate | 370 H-020 B | |
| 2 | Jack stand, Dataliner | 460 H-057 | |
| 2 | Jack stand, Dataliner | 460 H-059 | |
| 2 | Ramp | 570 H-092 D | |
| 4 | Long cotter pin | 470 H-010 | |
| 1 | Thrust journal | 410 H-135 | |
| 2 | Clamping washer | 570 H-196 | |
| 1 | Cart for draw bar | 470 H-025 B | |
| 1 | Winch mounting | 570 H-088 B |
| 3 draw bar, complete kit 570 H-3000 |
| 1 | Tail pulley | 470 H-020 B | |
| 1 | Double cylinder holder | 470 H-112 | |
| 1 | Single cylinder holder | 470 H-113 | |
| 2 | Single cylinder holder, transverse | 470 H-114 | |
| 2 | Draw yoke with locking pin | 410 H-051 | |
| 1 | Pull clamp, wide | 400 H-302 | |
| 1 | Pull clamp, narrow | 410 H-030 | |
| 1 | Attachment kit and bolt M20 | 470 H-089 B | |
| 2 | Extender, 1000 mm | 410 H-074 | |
| 3 | Extender, 125 mm | 410 H-071 | |
| 3 | Extender, 250 mm | 410 H-072 | |
| 3 | Extender, 590 mm | 410 H-073 | |
| 3 | Chain, 3000 mm | 470 H-015 | |
| 3 | Chain mounting | 410 H-121 | |
| 3 | Air hydraulic pump | PH 414 Z | |
| 3 | Safety wire | 470 H-083 | |
| 3 | Pressure cylinder 10 t, stroke 200 mm | 460 H-002 B | |
| 3 | Pusher head | 410 H-120 | |
| 1 | Tool cart | 570 H-069 | |
| 1 | Angle tightening clamp | 410 H-124 |
| Laser measurement system CM 600 DLA |
The part numbers are Dataliner's own part numbers.
| 1 | Holder for measuring rod | 470 H-037 | |
| 1 | Measuring rod 2550 mm | 670 H-047 | |
| 1 | Beam splitter | 670 H-059 | |
| 1 | Measuring scale (kit) | 470 H-060 U | |
| 1 | Hole and bolt holder (kit) | 470 H-061 C | |
| 3 | Measuring scale extender (kit) | 470 H-062 | |
| 1 | Galaxy Soft CD | 670 H-601 | |
| 1 | McPherson adapter | 670 H-066 | |
| 1 | Magnetic holder | 470 H-075 B | |
| 1 | Control fixture | 470 H-077 | |
| 1 | Combibox | 470 H-099 | |
| 1 | Measuring rod 5100 mm | 670 H-146 | |
| 1 | Laser | 670 H-455 E | |
| 1 | Automaster 220 V | 670 H-456 E | |
| 1 | McPherson tool | 470 H-066 C |
| CM 9000, laser measurement system accessories |
| 1 | Holder for measuring rod, adjustable | 670 H-048 | |
| 1 | Holder for measuring rod | 670 H-049 | |
| 1 | Holder for measuring rod, adjustable | 670 H-052 |
