PRE-RELEASE
Mixing pump
| Mixing pump |
With mixing pump OriMix 690, washer fluid or glycol can be mixed to the desired concentration automatically. Mixing occurs in a stainless steel ejector valve, where the mixture ratio is set using the nozzle. All control and regulation functions are controlled by means of compressed air so that even inflammable fluids can be handled safely. The equipment has a level sensor as well as safety functions that prevent the concentrate or pre-mixed fluid from being sucked back into the water piping. The suction line is equipped with a strainer and a non-return valve.
| Technical data |
| Incoming water | 2-5 bar |
| Incoming compressed air | 5-10 bar |
| Mixed solution | 2-10 bar, adjustable |
| Mixture ratio for fluid with a density similar to that of water, e.g. washer fluid | 0-60 % |
| Mixture ratio for glycol | 0-50 % |
| Suction line, length | 1.6 m |
| Dimensions |
| Depth | 250 mm |
| Width | 690 mm |
| Height | 900 mm |
Compare with the following equipment:
| • |
Alentec Orion
Internet address: www.alentec.com |
|
| • |
Assalub
Internet address: www.assalub.com |
|
