PRE-RELEASE

Spot extractor, work bay

Spot extractor, work bay

Spot extractor for welding work and for work with material that gives off unhealthy fumes. With spot extraction, contaminants are taken care of directly at the source, where they are most concentrated.

The extractor comes in lengths from 2 to 5 metres. If necessary, it can be positioned on a suspension arm to further increase reach. The extractor should also be flexibly adjustable in all directions and equipped with lighting. There is a special car glass hood for bonding windows.

The extractor should be positioned in such a way that it reaches all areas of the car.

The spot extractor is connected to a separate fan to achieve the best capacity. It is possible to use a group fan for several spot extractors.

Compare with the following equipment:

•	Nederman Internet address: www.nederman.com

PRE-RELEASE

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.