PRE-RELEASE
Belt tensioner with idler pulley, B207
| Belt tensioner with idler pulley, B207 |
| To remove |
| 1. |
Raise the car, twist the wheel out and release the front part of the right wing liner.
|
|
| 2. |
Relieve the belt tensioner with
83 96 095 Relieving tool, belt circuit
and remove the belt. Mark the direction of rotation on the belt.
|
|
| 3. |
Remove the belt tensioner.
|
|
| 4. |
Remove the idler pulley.
|
|
| To fit |
| 1. |
Fit the idler pulley to the belt tensioner.
Tightening torque 25 Nm (18 lbf ft) 
|
|
| 2. |
Fit the belt tensioner.
Tightening torque 50 Nm (37 lbf ft) |
|
| 3. |
Relieve the belt tensioner with
83 96 095 Relieving tool, belt circuit
and fit the belt in the marked direction of rotation.
|
|
| 4. |
Mount the front part of the wing liner and lower the car.
|
|
