PRE-RELEASE
Ignition coil with integrated ignition power module (320), A20NFT/LHU
| Ignition coil with integrated ignition power module (320), A20NFT/LHU |
| To remove |
| 1. |
Remove cover over ignition coils.
|
|
| 2. |
Unplug the ignition coil connector (A).
|
|
| 3. |
Remove the ignition coil (B).
|
|
| To fit |
| 1. |
Fit the ignition coil (B).
Tightening torque 10 Nm (7 lbf ft)
|
|
| 2. |
Connect the connector (A).
|
|
| 3. |
Make sure to locate the ignition coil cables so they are not pinched.
|
|
| 4. |
Fit the cover over the ignition coils.
|
|
