PRE-RELEASE
Position sensor, clutch pedal (133), A20NFT/LHU
| Position sensor, clutch pedal (133), A20NFT/LHU |
| To remove |
| 1. |
Remove the sound insulating baffle on the driver's side
.
|
|
| 2. |
Remove the connector (A).
|
|
| 3. |
Remove the bolt (B).
|
|
| 4. |
Remove the sensor from the bracket (C).
|
|
| To fit |
| 1. |
Fit the sensor to the bracket (C).
|
|
| 2. |
Fit the bolt (B).
Tightening torque 3 Nm (2.2 lbf ft) |
|
| 3. |
Fit the connector (A).
|
|
| 4. |
Calibrate the clutch pedal sensor. Connect Tech2 and carry out calibration of the clutch pedal sensor.
All - Add / remove - Other components - Fit the clutch pedal position sensor |
|
| 5. |
Fit the sound insulating baffle on the driver's side
.
|
|
